Cp-electronics EBDSM-PRM Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Cp-electronics EBDSM-PRM. CP Electronics EBDSM-PRM User Manual Manuel d'utilisatio
- Page / 8
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Overview
The EBDSM-PRM PIR (passive infrared) presence detector
provides automatic control of lighting loads with optional
manual control.
The output channel comprises a mains voltage relay
capable of simple on/off switching.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight.
All functionality is fully programmable using an IR handset.
Features
Front features
Back features
Ceiling PIR presence/absence detector
EBDSM-PRM
Product Guide
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Power Input & Switched Output Connector
Used to connect mains power to the unit and to connect a
switched load.
Switch Input Connector
Two input terminals can be used to manually override the
lights on or off.
Walk Test LED active
when movement is detected
Valid setting received
Power Input
& Switched
Output Connector
Switch Input
Connector
Sensor Lens
which covers...
PIR Sensor
IR Receiver
Light Level Sensor
Status LEDs
Power Input
& Switched
Output
connections
Résumé du contenu
Page 1 - EBDSM-PRM
Overview The EBDSM-PRM PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual control. The out
Page 2 - Sensor functionality
2 Detection diagram Area of lower sensitivity Area of high sensitivity Detection Mode The Detection Mode can be set to behave in Presence or Absence
Page 3 - Power-up test procedure
3 Installation Absence detection To use absence detection a retractive (momentary) switch must be connected between the 2 terminals on the diagra
Page 4
4 Installation The UNLCDHS has the ability to read back the settings stored in a device. To read back individual parameters Navigate to the param
Page 5 - Fault finding
5 Basic programming Parameter Name Default Value 0 1 2 3 UHS5 Handset Graphics Description Button Activation On On Turn ligh
Page 6 - Advanced programming
6 Advanced programming Parameter Name Default Value Range / Options Description UHS5 UNLCDHS Detector Parameters Walk Test LED Off On or
Page 7
7 This page intentionally left blank
Page 8 - Technical data
8 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior noti
Produits connexes et manuels pour Capteurs Cp-electronics EBDSM-PRM
(4 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels