Cp-electronics VITM4-2CH-2S Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Relais Cp-electronics VITM4-2CH-2S. CP Electronics VITM4-2CH-2S User Manual Manuel d'utilisatio
- Page / 8
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-
dustrial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected
using the spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors.
The modular approach allows for between 4 and 16 luminaires to be connected.
The VITM4-2CH-2S is a two channel, non-dimming distribution box for use in applications that require two independ-
ent supplies for switching lighting or lighting and ventilation circuits. For example this product is ideal for installations
that have essential and non-essential supplies for lighting circuits and require common switching using presence de-
tectors. This product provides connections for separate Live, Neutral and Permanent Live inputs.
VITM4-S-2CH-2S
Vitesse modular starter for non-dimming systems
VITM4-E-2CH-2S
Vitesse modular extender for non-dimming systems
Channel for channel nuts (zebs)
Removable gland plate with
3 x Ø20mm knockouts
3 x Ø20mm knockouts for rear
cable entry
4 x key slots to accept M6 (1/4”)
fixings
BESA box fixings
202mm
150mm
146mm
127mm
122mm
75mm
Fixing points
Warning. This device works at mains voltage. Be sure to take care when working with electricity.
The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.
Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.
Height - allow 150mm for total height of unit (including connectors and cable)
9 pole interface
connector and lead
supplied with
detectors
Channel 1 Channel 2 Channel 1
Channel 2
Overview
Vitesse Modular 4 - 2 Ch / 2 supply Switching Modules
Product Guide
System Components
Installation
VITM4-2CH-2S
Résumé du contenu
Page 1 - VITM4-2CH-2S
The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-dustrial, commercial and re
Page 2 - Connecting a detector
2 All wiring should be mains rated. Remove wiring compartment cover. Wire the box using the diagrams below Switched live turns the lights on
Page 3 - Wiring
3 Local emergency test switch N1 E L1 Local emergency test switch supply 1 Emergency test using central switch N1 E Multiple boxes Emergency test us
Page 4 - Applications
4 Window / room switching Window / room switching + Extender 2 Channel detectors The flexibility of using two channels detectors allows the following
Page 5
5 This page intentionally left blank
Page 6
6 This page intentionally left blank
Page 7
7 This page intentionally left blank
Page 8 - Ratings
8 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice
Produits connexes et manuels pour Relais Cp-electronics VITM4-2CH-2S
(12 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels